RELATED: How To Anonymize and Encrypt Your BitTorrent Traffic the second tutorial is optional (but remote access is incredibly handy to have for this project, as a download box is a perfect candidate for a headless build), and the most important part of the third tutorial is simply setting up the hard drive and configuring it to auto-mount on boot (as described in the third guide). How to Turn a Raspberry Pi into a Low-Power Network Storage DeviceĮverything in the first tutorial is necessary.How to Configure Your Raspberry Pi for Remote Shell, Desktop, and File Transfer.Everything You Need to Know About Getting Started with the Raspberry Pi.If you need to get up to speed in these areas, we strongly suggest reading the following guides in the order we have them listed here: You can also type: sudo apt update & sudo apt full-upgrade -y.For this tutorial, we assume that you have a Raspberry Pi unit with Raspbian installed, are able to access the device either directly via an attached monitor and keyboard or remotely via SSH and VNC, and that you have an external USB drive (or drives) attached to it.Type: sudo apt-get update -y & sudo apt-get upgrade -y.Copy the ip address and go to address reservation of your router.You will see a network attached wired device with ip address on your router.Then check for attached devices on your router.Go to the ip address 192.168.0.1 or (Check your router ip on the backside of the router).Then connect the other end of ethernet cable to the LAN port of the router.Connect the ethernet cable with the raspberry pi.Install all the software mentioned above.Insert the micro sdcard inside the sdcard slot of raspberry pi.Then save a blank file named ssh on the sdcard.At first, flash the Raspbian OS on the micro sdcard.
0 kommentar(er)
